Our Club
Our Repeaters and Beacons
Our club operates a number of publicly-available repeaters in York Region.
Excepting the IRLP node indicated below, no tones are required for access.
The VE3YRC-VHF repeater is linked to the VE3YRC-UHF repeater.
(Link to VE3MOT also avalible but normally off)
If you use the repeaters, please join the club to help support the maintenance of these systems.
Our club operates H.F. Beacon VE3RAT, transmitting CW on 18.101 MHz.
Power output is 1Watt into a Hamstick Verticle at 30 feet AGL located at Thornhill, ON (FN03).
The station is run courtesy of member John Little VE3TRL
Please send reception reports to va3vfo@yrarc.ca
* LINKED ON
| Call | Type | Frequencies | Tone | Location |
|---|---|---|---|---|
| VE3MOT | VHF | 147.180/147.780 | none | Near Richmond Hill |
| VE3YRA | VHF | 145.350/144.390 | none | Near King City |
| *VE3YRC | VHF | 147.225/147.825 | none | Near Aurora |
| VE3YRC | IRLP VHF | 147.225/147.825 | 118.8 | Near Aurora |
| *VE3YRC | UHF | 444.225/449.225 | none | Near Richmond Hill |
| VE3YRC | 6m | 53.010/52.010 | none | Seeking new location |
| VE3RAT | 17m | 18.101 BEACON | CW | Near Thornhill (FN03) |
NOW LINKED ! VE3YRC-Vhf AND VE3YRC-Uhf NOW LINKED !
The Repeater Plan Update of 2008 for Southern York Region is complete !
147.225 is now permanently linked to 444.225.
The VE3MOT repeater can also be linked to these Repeaters
but linking is usually Turned OFF. ALL links can only be activated
by our repeater trustee.
Recent Operational Status Changes
VE3MOT (vhf) 147.180 MHz ON reported problem - requires audio adjustmentVE3YRC (vhf) 147.225 MHz LINKED to VE3YRC (uhf) 444.225 MHz ON
VE3MOT 147.880 LINKED to VE3YRC (uhf) 444.225 OFF
VE3RAT 18.101 cw beacon ON as of 29 October 09 *PLS QSL*
Amateur Fast Scan Television:
If you are interested in operating this mode, please contact VA3VFO at va3vfo@rac.ca
The repeater has 70cm Input and 1253 MHz Output. It is also possible to link using 912Mhz.
The "line of sight" nature of the1253 MHz output, will make its new location dictated by users' location.
If a group of users can be established, we will reactive FSTV, pending a host tower site.
For more information, come out to one of our meetings or contact us via our Contact Us page.


